Pages

WELCOME

This blog was created to act as a record of the cards and other projects that I have made. It is for both my own reference and to help inspire anyone who wants to take a look.

I'd love it if you'd leave me a comment so that I know what you think of my projects and that you've been to visit!

Anyone can comment, even those who don't have a blog. (Just look for the word 'Comments' under the three little pictures at the end of each post). Readers without a blog can add an anonymous comment, but please leave your name (and docrafts username if applicable) so I know who you are!

Slideshows of all the cards I've uploaded to my blog can be found at the bottom of the page.



PEOPLE WHO FOLLOW MY BLOG

Showing posts with label SBinders. Show all posts
Showing posts with label SBinders. Show all posts

Monday, 7 December 2015

Duck Egg Blue and Brown Butterfly Aperture CAS

This is a card that I made a part of a session of CAS cards at the craft group that I go to with a few friends. It is heavily influenced by Michelle Short's cards, and you can see the card that specifically influenced this one here.
 

Firstly, the butterfly aperture was cut from a panel of white card using the largest butterfly die from the Spellbinders Shapeabilities Butterflies 2 die set.
 
The sentiment, from the Woodware Happy Anniversary stamp set, was stamped below the aperture using Versafine Vintage Sepia archival pigment ink. The panel was then 3D'd over a small panel of the duck egg blue swirl paper from the Papermania Bellisima paper pack onto a square cardblank.
 
As a finishing touch, Ranger Crystal Stickles were applied around the aperture and a few blue gems were added to the body of the butterfly.

Wednesday, 4 November 2015

Teal and Lime CC Designs Rainy Day Emma

This is a nice bright girlie card today, using the cute CC Designs
Rainy Day Emma image.
 
 
To begin with, the image was stamped using Memento Tuxedo Black dye ink and coloured with Copic markers:
 
Hair: E41, E43, E44
Skin: E000, E00, E11, E21, R20
Jacket: B00, BG09, BG10
Gloves/Umbrella: YG11, YG13, YG17
Scarf: YG17
Wellies/Umbrella Handle: BG02, BG09
 
A Papermania Snow White gel pen was used to add highlights to the image.
 
 
The image was then fussy cut and added to an oval die cut using the Nestabilities Classic oval die and matted onto a lime oval and teal scalloped oval, also die cut using the Nestabilities dies.
 
A panel of teal cardstock was diecut using one of the Spellbinders Bracket Borders #1 dies, as was a panel of the patterned paper from the Papermania Venetian Skies Creative Tones paper pad.

These were matted together and the image panel added on top.

As an added detail, the Memory Box Tiny Bow die was used to create a bow from the lime green cardstock and added below the image panel.
 
 
The sentiment, from the Kaisercraft Occasions stamp set, was stamped along the bottom edge of the card using Memento Teal Zeal dye ink.
 

As a final finishing touch, small dots of Ranger Glossy Accents were added to mimic raindrops.

The inside of the card was also decorated to mirror the front of the card, just with a different sentiment, taken from the Kaisercraft Birthday stamp set, also stamped using the Teal Zeal ink.

Wednesday, 28 October 2015

Pink Black and White Butterfly Tag Wedding

So, here is the second of the two wedding cards I made. This one was very highly influenced by Laura Bassen and you can see her version of this card here over on her blog.
 
Ideally I would have liked to have used a grey patterned paper in the background, but it wasn't until after I'd made it that I realized I actually had some I could have used! Typical!!!

Anyway, this card began with a sheet of the black and white striped paper from the Papermania Clare Curd The Big One paper pad. The panel was adhered to the front of an A5 card blank.
 
 
A piece of card was then covered with a piece of the pink floral patterned paper from the HOTP Wedding paper pad an die cut using the Sizzix Tags #3 Bigz die. A Papermania black eyelet was added.
 
Using a sheet of white glitter paper, the Seville Buckle by Memory Box was die cut and added to the tag.
 
Another piece of card was then covered with the pink mesh-effect paper also from the Wedding paper pad and die cut using a leaf die from the Spellbinders Foliage die set. The two leaf branches were added behind a butterfly which was die cut using the Willoughby Butterfly die by Memory Box with a heavyweight vellum. This was then 3d'd to the tag.
 
 
The sentiment panel was created using a pre-printed panel in the Wedding paper pad and stamped using the Mr & Mrs stamp from the American Crafts Wedding stamp set.
 
Black and white Baker's twine was threaded through the black eyelet on the tag and it was added to the front of the card.
 
 
For the inside of the card, the same patterned paper was used, and a second tag was created, this time from white card. 
More leaves were die cut using the same patterned paper and the sentiment, also from the Wedding stamp set was stamped onto a panel of patterned paper from the Wedding paper pad.
 
 
On the reverse of the card, a couple of small Sizzix Sizzlits Scalloped tags were added, stamped with the date of the wedding. Behind the 'Handmade By' stamp was a label created using a die from the Spellbinders Parisian Accents die set and paper from the Wedding paper pad.
 
 
 To complement the card, a tag was also created for the gift. This time a length of lace was added and a sentiment panel from the Wedding paper pad was added across the butterfly die cut. 
 
 

Saturday, 23 August 2014

Mixed Media Canvas For My Gran's 90th Birthday

This is a post I've been promising to get finished for an age now.

Way back in May I think it was, I suggested to the members of a cardmaking group that I go to that maybe we would all like to have a go at making a mixed media canvas. I was prompted to do this as I was unable to attend the monthly Bristol Playday and this was their planned project and I had really been looking forward to having a go. Purely selfish reasons!! I was aware that not only was it an ambitious project for us all, but also that it wouldn't get finished in just one evening so we agreed to set aside about 3 weeks to get it done.

Inspiration for my canvas was taken from this Youtube video by Gabrielle Pollacco.

The first week consisted of die cutting a load of shapes from chipboard and mountboard in readiness for the next week when we would begin in earnest.

That was when my project hit a snag. My printer started to play up and I figured it needed a new ink cartridge. So I went to the next group meeting with a very purply tinged photograph of myself and my brother and sister so that I could use it for placement in the hope that I could get another one printed in time for the next week.

The canvas was started and I added a few different pieces of patterned paper from the Basic Grey Sugared paper pad.

Some additional items were then also adhered to the canvas, including skeleton leaves, some crêpe bandage, a heart doily, some crochet lace, some jute and some of the builders' scrim cut into irregular shapes.

The crêpe bandage was adhered down, along with all the other layers, using Mod Podge. I felt like the bandage needed more glue in order for it to stay attached, but it took forever to dry!!!!

Once the Mod Podge had finally dried, I was then able to proceed by applying some homemade texture paste through a Plaid polka dot stencil and a mask diecut using the Sizzix Brick Wall decorative strip die onto the canvas, overlapping some of the elements. I also used a strip of builders' scrim as a stencil with the texture paste.


Whilst waiting for the texture paste to dry on the canvas, I then decided to prepare some silk flowers and some bottle tops ready to be used the following week. These were covered in a layer of gesso.

When the texture paste had dried, I could then add some crochet lace, a Sizzix flourish diecut and a couple of the silk flowers.  The whole thing was then covered in a layer of gesso. In retrospect, I think this should have been watered-down gesso, but you learn from your mistakes, right??


On returning to the project the next week, I was pretty pleased with the way it was looking. However, despite new ink cartridges, I was still unable to print off the photograph so I was having to try and plan it all without the photograph being attached to the canvas.

So, the first thing I did on starting on the canvas was to adhere the flowers and bottle tops to the canvas using silicon glue. I then took a selection of buttons that have been in my stash for a very long time and coated them all in gesso. I then cut small squares of the jute fabric and adhered these inside the bottle tops, mainly because some of the buttons looked a bit lost just sitting in the bottle tops, and this helped to fill them out a little. Once the jute was well stuck into the bottle tops, I could then add the buttons.

I then die cut some circle frames from cardboard using circle and scalloped circle Nestabilities dies and added these around both buttons and flowers on the canvas.

Once the glue had set on all of the embellishments, a layer of gesso was added over all of the embellishments and diecuts that had been added.

When the gesso was dry, then I could start on the fun part........adding some colour.

I started by mixing some of the pink acrylic paint that I had (Artiste Tea Pink) with some water in a misting bottle with a small amount of the Artiste Pearl Medium paint. However, when I sprayed this onto the canvas, it hardly showed up as it was so pale. So, I added some of the Artiste Dusky Pink acrylic paint to the bottle and this gave a much better effect.



Once I was happy with the coverage of the pink paint, I then added some of the Burnt Umber paint from the same range into the mister bottle and oversprayed the canvas with that.



I was pretty pleased with the effect, but, that, unfortunately is how my canvas remained until the start of August. The printer was still out of action, despite my varied efforts to try and get it to work. After I gave up on that as a bad job, we then had to wait until after my in-laws had been for their annual visit to go and purchase a new one. On top of that, it was now only four days until we were due to go to the Midlands to celebrate my gran's 90th birthday with the whole family who were travelling from all corners of the globe and the country to help her celebrate.

So, with a new printer to try and learn how to use, after a couple of aborted attempts to print the photograph out, I succeeded and proceeded to attempt to finish my gran's canvas.

The first thing I did was to add the photograph. However, that was not as straightforward as it should have been. The photograph would have to lay over one of the diecut shapes and silk flowers that I had already affixed to the canvas, so I had to find a way to add the photograph but raise it up. I decided to cut a piece of mount board to the size of the photograph, but just a shade smaller so it wouldn't be seen, and then trim off the corners so that it would fit around the embellishments. The photograph was adhered to the mount board and was finally added to the canvas.

To draw attention to the photograph, I also added some die cut photo corners and a decorative border. To do this with the dies I have, I cut several layers of the same die and glued them together to create a sort of faux chipboard.


Whilst that was drying, I then decided I needed a few more diecuts to add around both the photograph and the edges of the canvas. I used some Sizzix Sizzlits dies and some XCut dies, creating the faux chipboard shapes. Once the shapes had been created, they were each coated in gesso and then sprayed with the Burnt Umber, Tea Pink and Pearl Medium paint mixture.

Cream pearl brads by Papermania were then added to the larger Sizzix latch die cuts and all the shapes added to the canvas, including a second Sizzix Flourish diecut. Some pink paper flowers from my stash were also added.


The next stage was to add some definition around all of the embellishments, so some of the watered-down Burnt Umber and Tea Pink acrylic was painted around the embellishments. Then another coat of the gesso was added to the embellishments so they would stand out a bit more. Some of the pink acrylic was added to some of the elements, and some metallic rub-ons were added to some of the chipboard shapes.




The next stage was to paint some of the small cotton spools by Bare Basics that I had in my stash from an earlier project with gesso and then to wrap them with some pink embroidery threads. These were then adhered to the canvas, as were a selection of pearls from Kort & Godt and Say It In Crystals. Also added was a key charm from an old HOTP kit I had. I added it using a jump ring and some of the pink embroidery thread.


The final step was to decide on a sentiment. As I hoped that this would be displayed permanently, I didn't want anything too 'birthday related' to be on it, and originally I was going to add a banner die with the words ;With Love' on it. But, once I had made it, the words weren't particularly clear, so I had to have a rethink. That's when I remembered all the word tiles that I had in an old K&Co embellishment kit that I've never used!! And I managed to find two that were perfect. Us and You.



To complete the sentiment, I used my mft small lower case alphabet die set to die cut 'from' and 'to' from medium weight card. The letters were painted with gesso and the Burnt Umber acrylic paint. The chipboard word embellishments were originally just slightly the wrong colours for the project, so I added a thin coat of gesso to them and then sprayed them with the brown acrylic paint mix used on the rest of the diecut embellishments. This helped to tie them in with the rest of the project. The letter die cuts and the edges of the chipboard word embellishments were then embellished using the metallic rub-ons.

And so here is the completed canvas in all its glory.


Thankfully, my gran really seemed to really like it, which was a big relief. My brother also seemed to like it, as I had told him earlier that I had signed the card on the gift from all three of us, but not told him what the gift actually was. (Unfortunately, my sister was unable to fly over from Spain as this is the busiest time of year for her in her shop).

And, everyone else there seemed to like it as well, and my aunt insisted on taking down one of my gran's pictures on the wall and putting it up for all to see. I've just got to pray now that bits don't start dropping off!!!!


Monday, 17 February 2014

Kristina Werner Inspired Card #2

Well, here we are again. This time it was my turn to choose the card from Kristina that we were to CASE and here is the link to the video showing the card I chose and a link here to Kristina's blog post showing this card.

In need of a few anniversary cards, that's what I decided to make based on this card design.



To begin with, create the patterned paper panels. To make these, cut up strips of various papers from the K&Co Brianna paper pad in varying widths. I found the easiest way to adhere these to the panel and ensure they stay attached was to cover the panel entirely with adhesive, making sure the adhesive goes right up to the edges. This is particularly important if you have small bits in the corners. Once covered, turn the panel over and trim away the overhanging bits.

Panels of cream cardstock were then stamped using the Happy Anniversary stamp from the Kaisercraft Occasion's stamp set and the Brilliance Cocoa Bean pigment ink. The lower edge of the panel was then diecut using one of the Spellbinders Bracket Borders dies. The paper strip panel was then adhered to this diecut panel and a length of lace adhered to hide the edge of the paper strips.


The next step was to add some detail to the card blank. Using the basket weave stamp from the Waltzing Mouse Picnic Patterns stamp set and the Cocoa Bean ink, the border stamp was stamped three times across the bottom of the cardblank. Remember to mask off the left panel of the card first so the reverse of your card is protected.

Once the ink is dry, adhere the paper strip panel to the card using 3d foam.


To create the banner detail, two different designs of pennants were stamped from the Whimsy Stamps Celebration Circle Pennants stamp set using the Cocoa Bean ink and die cut using the frilly Whimsy Stamps Shapeology Circle Pennants die. These were connected together using cream embroidery thread and placed across the card.


As a finishing touch, the top right corner was then punched using the WRMK Corner Chomper, using the 1/2" corner. 

Here is an image of the front of the finished card.


The inside of the card was also decorated to match and complement the front of the card. This time the greeting was stamped using the Congratulations stamp from the Papermania Mix and Match Scrolls and Sentiments stamp set with the Cocoa Bean ink.


Once Ali has uploaded her version, I will add a link to her creations which I'm sure are stunning!

Here is a link to Skipper's take on this card. It's a beauty!
Blog Widget by LinkWithin